CB1000R Ermax installation

The Ermax's installation instruction is very poor in my opinion .

1. First of all remove original top fairing plate, by unpinning 2 plastic clips

2. The result shall be looked like this

3. Now for removing all the light plate we have to release  the following 2 screw

   before:

   after: 

4. Then you have to push up the all construction up (carefully, till the 2 pins released)

The result:

The pins ->

The hols for pins ->

5. Now you can release 3 bolts the installation manual is talking about.

You need to do it for expanding the holding form

Before adding the expansion:

After the expansion:

6. Fitting the internal screen part, using one bolt screwed into a expansion frame

7. Fitting the screen itself on top of internal part